SMQ24G - Belimo Damper actuator IP66/NEMA4 16 Nm, 7.0 s, 90° AC / DC 24 V, Open/Close

Find all parts for your ventilation system at iacs, the Free Delivery and 1-2 Delivery is available for all the Belimo Actuators in stock

The Belimo SMQ24G is a type of Actuator used to control dampers in HVAC systems and applications.

This kind of Actuator rotates the damper in order to control it.

The force applied by the Torque of the SMQ24G is 16 Nm.

This Rotary Actuator needs to be supported by a power supply of 24Vac/Vdc.

Find at IACS the ideal Belimo Actuator compatible with your system at the best price.

If you are unsure about size or installation, refer to the Belimo custom datasheet above or message iacs to receive special instructions and a custom quote.

The Belimo SMQ24G is a damper actuator used to modify air dampers in ventilation and air-conditioning systems.

This type of actuator generates a rotational motion.

The SMQ24G has a Open/Close Control.

The Torque force is 16 Nm.

Features
 

• Fields of application The actuator is particularly suitable for utilisation in outdoor applications and is protected against the following weather conditions:
  – UV radiation
  – rain / snow
  – dirt / dust
  – humidity
  – Changing atmosphere / frequent and severe temperature fluctuations (recommendation: use the actuator with integrated factory-installed       heating which can be ordered separately to prevent internal condensation *)


• Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.
  


• Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).
  


• Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.A minimum permissible angle of rotation of 30°<) must be allowed for.


• High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.


• Home position The first time the supply voltage is switched on, i.e. during initial startup, the actuator carries out an adaptation. After pressing the «gear disengagement» pushbutton, the actuator moves to the home position at the end stop.


• Adaption and synchronisation During adaptation, the upper and lower spindle end stop is recorded and deposited in the actuator. Detection of the mechanical end stops enables a gentle approach to the end positions and thus protects the actuator mechanism.During synchronisation, the actuator moves to the home position for angle referencing. This ensures correct position regulation.

•     Electrical data Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
•     Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•     Power consumption In operation 15 W @ nominal torque At rest 2 W For wire sizing 26 VA (I max. 20 A @ 5 ms)
•     Connection Cable 1 m, 3 x 0.75 mm2
•     Functional data Torque (nominal torque) Min. 16 Nm @ nominal voltage
•     Direction of motion at Y = 0 V In switch position 0 resp. 1 
•     Manual override Gearing latch disengaged with pushbutton, can be locked
•     Angle of rotation Max. 95°<) , can be limited at both ends withadjustable mechanical end stops
•     Angle of rotation limiting min. 30°<)
•     Running time 7 s / 90°<)
•     Automatic adjustment of operating range to Manual triggering of the adaption by pressing the match the mechanical angle of rotation «Adaption» button
•     Sound power level Max. 52 dB (A)
•     Position indication Mechanical, pluggable
•     Negative torque ≤50% from nominal torque (Caution: can only be used with restrictions. Please contact your Belimo representative.)
•     Safety Protection class III Safety extra-low voltageUL Class 2 Supply
•     Degree of protection IP54 NEMA 4, UL Enclosure Type 4
•     EMC CE according to 2004/108/EC 
•     Certification Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14 cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02
•     Mode of operation Type 1
•     Rated impulse voltage 0.8 kv
•     Control pollution degree 4
•     Ambient temperature –30 ... +40°C +40 ... +50°C (Caution: can only be used with restrictions. Please contact your Belimo representative.)
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity 100% r.H.
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 4
•     Weight Approx. 4.7 kg