UE025XLC01 - Carel humiSteam X-plus, Steam Humidifier, Isothermal Immersed electrode humidifier, 25 kg/h, 400 Vac three phase, with built-in controller, cleanable cylinder

At IACS, you can find the whole range of Carel Humidification components for your HVAC system.

Carel's premium selection for immersed electrode Humidifiers is the X plus humiSteam Humidifiers. For programming and operation control, they have an integrated Controller with a visual display and keyboard.

The Carel UE025XLC01 is an Immersed electrode Humidifier

The Steam production is 25 Kg/h.

The Power Supply needed is 400 V.

A built-in Controller of type X-plus is present in this Carel Humidifier.

If you need technical assistance, consult the Carel manualsheet or get in touch with our IACS technical support staff.

The type “X” humiSteam humidifiers have a built-in controller with graphic display and keypad for programming and controlling operation.

The following modes can be selected at any time:

- ON/OFF by external humidistat
- Proportional based on an external voltage or current signal
- Proportional based on an external signal plus a safety limit probe in the duct
- Modulating based on the set point and a humidity probe reading
- Modulating based on the set point, a humidity probe reading and a limit probe in the duct
- Modulating based on the set point and the reading of an external temperature probe (e.g. steam baths)
- Controlled by BMS

The steam flow-rate is modulated continuously from 20 to 100% of maximum capacity (10 to 100% in the 90 and 130 kg/h models), except for in ON/OFF mode, when production is “all-or-nothing”.

The type “X” humiSteam humidifiers can accept the following external signals, selected on the keypad: voltage-free contact from a humidistat, 0 to 1 V, 0 to 10 V, 2 to 10 V, 0 to 20 mA, 4 to 20 mA.

The type “x” controllers exploit all the advantages of pco technology, the family of CAREL programmable controllers:

- Simplicity, with the graphic display and messages in diff erent languages
- Operation with daily and weekly time bands & variable set points
- BMS connectivity via various types of LAN (e.g.: Modbus®, BACnet™, LON®)
- Complete diagnostics with text messages, alarm log with time stamping
- Remote diagnostics via GSM (optional)
- Automatic draining in standby