UK24MOD Gateway MP to Modbus RTU - Belimo

Visit iacs for further details on each part of your ventilation system.

Currently in stock, all Belimo accessories can be delivered for free or within one to two days.

The Belimo UK24MOD is a Gateway MP to Modbus RTU .

Iacs offers the most affordable Belimo system accessories.

Please refer to the aforementioned Belimo custom datasheet if you have any questions concerning installation or sizing, or contact iacs by email if you need more specialised help.

Mode of operation: The UK24MOD allows the actuators to be controlled digitally via the MP-Bus and send back their current operating status. The control system information and the response is administered in registers in the UK24MOD and can be processed with Modbus commands. This permits the actuator functions to be integrated directly into the Modbus.

Sensor linking: One sensor can be connected per MP/MFT(2) actuator. This can be a passive resistance sensor (PT1000, NI1000 or NTC), an active sensor (output DC 0…10 V), or a switching contact. This provides a straightforward way of digitising the analogue signal of the sensors with the Belimo actuator and transferring it via UK24MOD to the Modbus. MPL actuators don't provide a sensor input. 

Electrical data:

• Nominal voltage AC 24V, 50/60 Hz / DC 24V
• Power supply range AC / DC 21.6…26.4 V
• For wire sizing 3 VA
• 

Functional data:

• Supported actuators MP/MPL/MFT(2), BF-TopLine
• Quantity of actuators max. 8 pcs.
• Communication with actuators Belimo MP-Bus, Master-Slave, 1200 Bd
• Maximum signal conductor lengths MP Dependent on the number of connected actuators, actuator type, type of supply and signal conductor cross-section For details see page 5
• Modbus protocol Modbus RTU Supported functions: 3, 6 (For register assignment, see page 11)
• 

Safety:

• Protection class III Safety extra-low voltage
• EMC CE pursuant to 2004/108/EC
• Ambient temperature 0…+40° C

Installation / Dimension / Weight:

• Mounting Control cabinet installation,
• can be snapped onto top hat rail 35 mm
• Dimensions see page 7
• Weight ca. 100 g