GV12-230-3-T - Belimo Actuator for large-stroke valves 12000 N, 0.79 mm/s, 80 mm, AC 230 V, 109 VA, 3-point, 2 x SPDT | ideal for globe valves

For any Belimo Actuators that are in stock at iacs, we offer Free Delivery and Next 1-2 Day Delivery.

The Belimo GV12-230-3-Tis a type of Actuator used to open valves in HVAC systems and applications.

The Torque used by the GV12-230-3-T is 12000 N.

This Belimo Actuator requests a power supply of 230Vac.

This Belimo component can be used with large-stroke Valves.

IACS has the best prices on the right Belimo Actuators for your system.

Consult the Belimo custom datasheet above or contact iacs via email for personalised assistance if you have queries about size or installation.

GV12-230-3-T - Actuator for large-stroke valves 12000 N, 0.79 mm/s, 80 mm, AC 230 V, 109 VA, 3-point, 2 x SPDT

•    Position indicator mechanical
•    IP 65, Manual override temporary
•    Connection with terminals 

Features

• Mode of operation The actuator is activated with a 3-point signal. If the actuator reaches the end position, then the motor will be switched off via (two) load-dependent switches. These switches protect the motor when there are foreign objects between the fitting seat and the cone.


• Installation actuator – valve The actuator is mounted ex-works to the corresponding valve. The power connection is accomplished with form closure. The power transmission is accomplished by means of the coupling that is secured against torsion.


• Actuator replacement If an actuator must be replaced in an emergency situation, then the installation instructions for replacement actuators must be followed.


• Manual override In deenergised state and/or when the motor is shut off, upward and downward movement can be accomplished when the handwheel is pressed in.


• High operational reliability The actuator is protected against short circuits, polarity reversal and overloading.


• Function indication The stroke is indicated mechanically on the bracket. The indicator adjusts itself automatically.

•    Electrical data Nominal voltage AC 230 V, 50 Hz
•    Nominal voltage range AC 207 ... 253 V
•    Power consumption (Dimensioning) 109 VA
•    Connection Terminals, 1.5 mm2
•    Functional data Actuating force (Closing force) 12 kN
•    Control 3-point
•    Minimum pulse duration >0.5 s
•    Manual override Handwheel, temporary
•    Nominal stroke 65 mm
•    Actuating time 0.79 mm/s
•    Sound power level 67 dB(A)
•    Position indication mechanical (30 …)65 mm stroke
•    Operating mode EN60034-1/A11 S3-50% ED 1200 c/h
•    Lubricant for gearbox Molyduval Valenzia H2
•    Auxiliary switch 2 (switching capacity 16 A, AC 250 V)
•    Safety Protection class II
•    Protection mode IP65
•    EMC CE according to 2004/108/EC
•    Low-voltage directive CE according to 2006/95/EC
•    Mode of operation Type 1 (EN 60730-1)
•    Rated impulse voltage 2 kV (EN 60730-1)
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature –20 ... +70°C
•    Ambient humidity 95% r.h., non-condensating (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions See «Dimensions» on page 3
•    Weight Approx. 10.5 kg