GV12-24-SR-T - Belimo Actuator for large-stroke valves 12000 N, 0.79 mm/s, 80 mm, AC 24 V, 91 VA, modulating | ideal for globe valves

We provide Free Delivery and Next 1-2 Day Delivery for all Belimo Actuators that are in stock at iacs.

The Belimo GV12-24-SR-Tis a kind of Actuator used to operate valves in HVAC applications and systems.

The force applied by the Torque of the GV12-24-SR-T is 12000 N.

This Valve Actuator needs to be supported by a power supply of 24Vac/Vdc.

This Belimo part is suitable for large-stroke Valves.

Find the appropriate Belimo Actuator for your system at the greatest price at iacs.

If you have questions about size or installation, consult the Belimo custom datasheet above or send an email to iacs to get personalised guidance.

GV12-24-SR-T - Actuator for large-stroke valves 12000 N, 0.79 mm/s, 80 mm, AC 24 V, 91 VA, modulating

•    Control DC 0...10 V
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V
•    Position indicator mechanical
•    Connection with terminals
•    IP 65, Manual override temporary

Features

• Mode of operation The actuator is activated with a standard DC 0 … 10 V signal. If the actuator reaches the end position, then the motor will be switched off via (two) load-dependent switches. These switches protect the motor when there are foreign objects between the fitting seat and the cone.


• Installation actuator – valve The actuator is mounted ex-works to the corresponding valve. The power connection is accomplished with form closure. The power transmission is accomplished by means of the coupling that is secured against torsion.


• Actuator replacement If an actuator must be replaced in an emergency situation, then the installation instructions for replacement actuators must be followed.


• Manual override In deenergised state and/or when the motor is shut off, upward and downward movement can be accomplished when the handwheel is pressed in.


• High operational reliability The actuator is protected against short circuits, polarity reversal and overloading.


• LED status displays


• LED coding with faults

•    Electrical data Nominal voltage AC 24 V, 50 Hz
•    Nominal voltage range AC 21.6 ... 26.4 V
•    Power consumption 91 VA
•    Connection Terminals Terminals, 1.5 mm2
•    Functional data Actuating force (Closing force) 12 kN
•    Control Positioning signal Y DC 0 ... 10 V, typical input impedance 100kΩ
•    Operating range DC 2 … 10 V (can be switched to 0.5 ... 10 V)
•    Position feedback DC 2 … 10 V (can be switched to 0.5 ... 10 V), max. 0.5 mA (Measuring voltage U)
•    Manual override Handwheel, can be locked (lock releases automatically when signal is received)
•    Nominal stroke 65 mm
•    Actuating time 0.79 mm/s
•    Sound power level 67 dB(A)
•    Position indication mechanical (30 …)65 mm stroke
•    Operating mode EN60034-1/A11 S3-50% ED 1200 c/h
•    Lubricant for gearbox Molyduval Valenzia H2
•    Protection class III Safety extra-low voltage
•    Protection mode IP65
•    EMC CE in accordance with 2004/108/EC
•    Mode of operation Type 1 (EN 60730-1)
•    Rated impulse voltage 2 kV (EN 60730-1
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature –20 ... +70°C
•    Ambient humidity 95% r.h., non-condensing (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions See «Dimensions» on page 4
•    Weight Approx. 10.5 kg