R540 - Belimo 3-way change-over ball valve T-hole, PN16

R540 - 3-way change-over ball valve T-hole, PN16

•    external thread G 2 1/4", DN 40, kvs 32
•    Housing nickel-plated, hot-pressed brass
•    Valve disk stainless steel
•    Seal PTFE / EPDM O-ring
•    Characterizing disk TEFZEL
•    Temperature of medium max. 100 °C
•    Leakage rate B-AB 1% of kvs


 

Features
 

• Mode of operation The open-close ball valve is operated by a rotary actuator. The rotary actuator is controlled by an open-close signal. Open the ball valve counterclockwise and close it clockwise.

•     Functional data Flow media Cold and hot water, water with max. 50% volume of glycol
•     Temperature of medium +5°C ... +110°C 1), (lower or higher temperatures on request)
•     Rated pressure ps see «Type overview»
•     Flow rate Bypass B – AB: approx. 50% of kvs value
•     Leakage rate Control path A – AB: Air bubble-tight (BO 1, DIN3230 T3)Bypass B – AB: 1% of kvs value
•     Pipe connector External thread to ISO 228/1
•     Differential pressure Δp_max 350 kPa (200 kPa for low-noise operation), Closing pressure Δp_s 1400 kPa
•     Angle of rotation 90°<), bypass B – AB 15 ... 90°<)
•     Installation position Upright to horizontal (in relation to the stem)
•     Maintenance Maintenance-free
•     Materials Fitting Forged, nickel-plated brass body
•     Valve cone and stem Stainless steel
•     Stem seal O-Ring, EPDM
•     Ball seat PTFE, O-Ring Viton
•     Dimensions / Weights see «Dimensions and weights», page 3
•     Motorizing see the complete overview of water solutions
•     ¹⁾The allowed media temperature can be limited, depending on the type of actuator. The correct values can be found in the corresponding actuator data sheets.