R7015R1P6-B1 - Belimo, 3-Way Characterised Control Valve, DN15, Flange, PN6, KVS 1.6

All Valves made by Belimo that are in stock with iacs are shipped for free or within 1-2 days.

The Belimo R7015R1P6-B1 is a Valve used as a control or shutdown Valve in heating, ventilation, and air conditioning systems. within a closed circuit.

The Pressure Nominal of this Belimo control Valve is PN 6.

This R7015R1P6-B1 Belimo Valve has 3 port opening connection.

IACS can help you get the best-priced Belimo Ball Valve for your system.

If you have any queries concerning size or installation, please refer to the Belimo custom datasheet above or contact iacs by email.

•     Functional data Flow media Cold and hot water, water with max. 50% volume of glycol
•     Temperature of medium +5°C ... +110°C¹) (lower or higher temperatures on request)
•     Rated pressure ps see «Type overview»
•     Flow characteristic Control path A – AB: equal percentage (to VDI/VDE 2178) n(gl): see «Type overview» Bypass B – AB: linear, flow rate is 70% of kvs value
•     Rangeability S_v See «Type overview»
•     Leakage rate Control path A – AB: Air bubble-tight (BO 1, DIN3230 T3)Bypass B – AB: Approx. 1...2% of kvs value (in relation to the highest value within the DN (e.g. R713))
•     Pipe connector Flange PN 16 (to EN 1092/1)
•     Differential pressure Δp_vmax 100 kPa, Closing pressure Δp_s 600 kPa
•     Angle of rotation 90°<) (Operating range control path A – AB 15 ... 90°<) ,bypass B – AB 15 ... 70°<) )
•     Installation position Upright to horizontal (in relation to the stem)
•     Maintenance Maintenance-free
•     Materials Fitting Forged, nickel-plated brass body
•     Valve cone and stem Chrome-plated brass
•     Stem seal O-Ring, EPDM
•     Ball seat PTFE, O-Ring Viton
•     Characterizing disk TEFZEL
•     Flange ring DN 15 / 20: Zinc-plated steel DN 25 ... 50: Aluminum
•     Flange joint surface Nickel-plated brass
•     Dimensions / Weights see «Dimensions and weights», page 3
•     Motorizing see the complete overview of water solutions
•     ¹⁾The allowed media temperature can be limited, depending on the type of actuator. The correct values can be found in the corresponding actuator data sheets.