SVL230A-RE Globe Valve Actuator Retrofit, AC 230 V, 150 s - Belimo | ideal for globe valves

For any Belimo Actuators that are in stock at iacs, we offer Free Delivery and Next 1-2 Day Delivery.

The Belimo SVL230A-REis a kind of Actuator used to operate valves in HVAC applications and systems.

The force applied by the Torque of the SVL230A-RE is 1500 N.

This Valve Actuator needs to be supported by a power supply of 230Vac.

This Belimo component can be used with Globe Valves.

Find the appropriate Belimo Actuator for your system at the greatest price at iacs.

If you have questions about size or installation, consult the Belimo custom datasheet above or send an email to iacs to get personalised guidance.

SVL230A-RE Globe Valve Actuator Retrofit, AC 230 V, 150 s

• Globe valve actuator retrofit
• 1500 N, 50 mm
• AC 230 V, 3-point
• Actuating time motor 150 s / 50 mm
• IP54, manual override temporary, perm.
• Universal valve adapter enclosed
• Connection terminal without cable

Installation on third-party valves The retrofit actuators for installation on a wide range of valves from various manufacturers are comprised of an actuator, universal valve neck adapter and universal valve stem adapter. Adapt the valve neck and valve stem to begin with, then attach the retrofit actuator to the valve neck adapter, connect to the valve and start up. The valve neck adapter/actuator can be rotated through 360° on the valve neck, provided it is permitted by the size of the installed valve.

Installation on Belimo valves Use standard actuators from Belimo for installation on Belimo globe valves. The installation of retrofit actuators on Belimo globe valves is technically possible.

Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked). The stroke can be adjusted by using a hexagon socket screw key (5 mm), which is inserted into the top of the actuator. The stroke spindle extends when the key is rotated clockwise.

High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.

Position indication The stroke is indicated mechanically on the bracket with tabs. The stroke range adjusts itself automatically during operation.

Home position Factory setting: Actuator spindle is retracted.

Direction of rotation switch When actuated, the direction of stroke switch changes the running direction in normal operation.

Electrical data: 

• Nominal voltage AC 230 V
• Nominal voltage frequency 50/60 Hz
• Nominal voltage range AC 85...265 V
• Power consumption in operation 3.5 W
• Power consumption in rest position 1 W
• Power consumption for wire sizing 6.5 VA
• Connection supply / control Terminals 4 mm² (cable Ø 4...10 mm)
• Parallel operation Yes (note the performance data)

Functional data:

• Actuating force motor 1500 N
• Manual override Gear disengagement with push-button, can belocked
• Nominal stroke 50 mm
• Actuating time 150 s / 50 mm
• Sound power level motor 55 dB(A)
• Position indication Mechanically, 5...50 mm stroke

Safety:

• Protection class IEC/EN II Protective insulated
• Degree of protection IEC/EN IP54
• EMC CE according to 2004/108/EC
• Low voltage directive CE according to 2006/95/EC
• Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
• Mode of operation Type 1
• Rated impulse voltage supply / control 4 kV
• Control pollution degree 3
• Ambient temperature 0...50°C
• Non-operating temperature -40...80°C
• Ambient humidity 95% r.h., non-condensing
• Maintenance Maintenance-free

Weight: Approx. 7.4 kg