UE008XL001 - Carel humiSteam X-plus, Steam Humidifier, Isothermal Immersed electrode humidifier, 8 kg/h, 400 Vac three phase, with built-in controller, disposable cylinder

At IACS, you can find the whole range of Carel Humidification components for your HVAC system.

Carel's premium selection for immersed electrode Humidifiers is the X plus humiSteam Humidifiers. For programming and operation control, they have an integrated Controller with a visual display and keyboard.

The Carel UE008XL001 is an Immersed electrode Humidifier

The Steam production is 8 Kg/h.

The Power Supply for this Humidifier is 400 V.

This Carel Humidifier has a built in Controller type X-plus.

If you need technical assistance, consult the Carel manualsheet or get in touch with our IACS technical support staff.

The type “X” humiSteam humidifiers have a built-in controller with graphic display and keypad for programming and controlling operation.

The following modes can be selected at any time:

- ON/OFF by external humidistat
- Proportional based on an external voltage or current signal
- Proportional based on an external signal plus a safety limit probe in the duct
- Modulating based on the set point and a humidity probe reading
- Modulating based on the set point, a humidity probe reading and a limit probe in the duct
- Modulating based on the set point and the reading of an external temperature probe (e.g. steam baths)
- Controlled by BMS

The steam flow-rate is modulated continuously from 20 to 100% of maximum capacity (10 to 100% in the 90 and 130 kg/h models), except for in ON/OFF mode, when production is “all-or-nothing”.

The type “X” humiSteam humidifiers can accept the following external signals, selected on the keypad: voltage-free contact from a humidistat, 0 to 1 V, 0 to 10 V, 2 to 10 V, 0 to 20 mA, 4 to 20 mA.

The type “x” controllers exploit all the advantages of pCO technology, the family of CAREL programmable controllers:

- Simplicity, with the graphic display and messages in diff erent languages
- Operation with daily and weekly time bands & variable set points
- BMS connectivity via various types of LAN (e.g.: Modbus®, BACnet™, LON®)
- Complete diagnostics with text messages, alarm log with time stamping
- Remote diagnostics via GSM (optional)
- Automatic draining in standby