UE045XL001 - Carel humiSteam X-plus, Steam Humidifier, Isothermal Immersed electrode humidifier, 45 kg/h, 400 Vac three phase, with built-in controller, disposable cylinder

Explore at IACS our full range of Carel Humidification parts for your HVAC system

Carel's top-tier offering in immersed electrode Humidifiers is represented by the X plus humiSteam models. They have an integrated Controller with a keyboard and visual display for programming and operating the device.

The Carel UE045XL001 is an Immersed electrode Humidifier

The Steam production is 45 Kg/h.

The Power Supply for this Humidifier is 400 V.

This Carel Humidifier has a built in Controller type X-plus.

For technical advice, refer to the Carel manualsheet and contact our IACS technical support team.

The type “X” humiSteam humidifiers have a built-in controller with graphic display and keypad for programming and controlling operation.

The following modes can be selected at any time:

- ON/OFF by external humidistat
- Proportional based on an external voltage or current signal
- Proportional based on an external signal plus a safety limit probe in the duct
- Modulating based on the set point and a humidity probe reading
- Modulating based on the set point, a humidity probe reading and a limit probe in the duct
- Modulating based on the set point and the reading of an external temperature probe (e.g. steam baths)
- Controlled by BMS

The steam flow-rate is modulated continuously from 20 to 100% of maximum capacity (10 to 100% in the 90 and 130 kg/h models), except for in ON/OFF mode, when production is “all-or-nothing”.

The type “X” humiSteam humidifiers can accept the following external signals, selected on the keypad: voltage-free contact from a humidistat, 0 to 1 V, 0 to 10 V, 2 to 10 V, 0 to 20 mA, 4 to 20 mA.

The type “x” controllers exploit all the advantages of pCO technology, the family of CAREL programmable controllers:

- Simplicity, with the graphic display and messages in diff erent languages
- Operation with daily and weekly time bands & variable set points
- BMS connectivity via various types of LAN (e.g.: Modbus®, BACnet™, LON®)
- Complete diagnostics with text messages, alarm log with time stamping
- Remote diagnostics via GSM (optional)
- Automatic draining in standby