F22180213 - IBC Controls VVX-motor IE2 3x230/400 V Built-in thermal contact, drawn to terminal

The IBC Controls F22180213 is a worm gear motor IE2 rated at 180 W and 200 rpm, designed for variable-speed control of rotary heat exchangers. This is an OEM variant of the standard IBC Controls 180/200 motor (F22180210), produced specifically for use in Hoval heat recovery units. If you are sourcing a direct replacement motor for a Hoval AHU or rotary heat exchanger, this is the correct part.

Compared to the IE1-rated F22090202 (90W Hoval OEM motor), this IE2 unit delivers double the output power at 180 W, making it suitable for larger Hoval thermal wheel assemblies with rotor diameters up to 2,500 mm. The aluminium housing provides improved thermal dissipation, and the built-in thermal contact is drawn to the terminal for straightforward integration. When used with an IBC Controls control unit such as the MicroMax180 or MiniMax, the motor must be D-connected (3×230 V).

Typical Applications

• Rotary heat exchanger (thermal wheel) drives in Hoval air handling units
• Variable-speed belt-driven thermal wheel systems in commercial and industrial AHUs
• Replacement/service part for failed OEM motors in existing Hoval heat recovery units
• Heat recovery ventilation systems requiring proportional speed control via 0–10V input signal
• AHU installations controlled by IBC Controls MicroMax180 or MiniMax control units
• Rotary heat exchangers up to 2,500 mm rotor diameter at speeds up to 12 rpm

Technical Specifications

• Manufacturer: IBC Controls
• Part Number: F22180213
• OEM Application: Hoval rotary heat exchangers (replaces standard F22180210)
• Motor Type: Worm gear motor
• Efficiency Class: IE2
• Poles: 4
• Rated Output: 180 W
• Rated Output Shaft Speed: 200 rpm
• Gear Ratio: 1:7
• Rated Torque (output gear): 6.0 Nm
• Rated Current: 1.2 A (230 V) / 0.7 A (400 V)
• Connection Voltage: 3×230/400 V, 50 Hz
• Connection (with IBC control unit): D-connected (3×230 V)
• Protection Form: IP55
• Ambient Temperature: −15 °C to +40 °C
• Max Operating Temperature: <+40 °C
• Max Rotor Diameter (at 12 rpm): 2,500 mm
• Thermal Contact: Built-in, drawn to terminal
• Output Shaft: Extended
• Housing: Aluminium coating for improved thermal dissipation
• Weight: 5.2 kg
• Warranty: 2 years

Compatible IBC Controls Control Units

This motor is suitable for use with the IBC Controls MicroMax180 and MiniMax control units for proportional speed regulation of rotary heat exchangers up to 2,500 mm rotor diameter. Ensure D-connection (3×230 V) when wiring to an IBC Controls control unit.