SHQ24A-MF100 - Belimo Linear actuator with rack 200 N, 7.0 s / 100 mm,

Find all parts for your ventilation system at iacs, the Free Delivery and 1-2 Delivery is available for all the Belimo Actuators in stock

The Belimo SHQ24A-MF100 is a type of Actuator used in HVAC and ventilation systems.

The force applied by the Torque of the SHQ24A-MF100 is 200 N.

This Rotary Actuator needs to be supported by a power supply of 24Vac/Vdc.

Find at IACS the ideal Belimo Actuator compatible with your system at the best price.

If you are unsure about size or installation, refer to the Belimo custom datasheet above or message iacs to receive special instructions and a custom quote.

SHQ24A-MF100  - Linear actuator with rack

•    200 N, 7.0 s / 100 mm,
•    AC / DC 24 V, modulating, MFT
•    Stroke range 0...100 mm
•    Manual override with push-button
•    Control DC 0...10 V (0...32 V adjustable)
•    Control DC 0...10 V (0...32 V adjustable)
•    Position feedback DC 2...10 V, 0...10 V,adjustable
•    Connection PVC cable 1m








 

Features

• Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and moves to the position defined by the control signal. The measuring  voltage U serves for the electrical display of the damper position 0 ... 100% and as slave control signal for other actuators.
  
  

• Parameterisable actuators The factory settings cover the most common applications. Input and output signals and other parameters can be altered with the BELIMO Service Tool, MFT-P.
  
  

• Simple direct mounting The actuator can be directly connected with the application using the enclosed screws. The head of the gear rod is connected to the moving part of the ventilation application individually on the mounting side or with the Z-KS1 coupling piece provided.
  
  

• Manual override  Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).
  
  

• Adjustable stroke The stroke of the gear rack can be adjusted on both sides in increments of 20 mm by means of mechanical end stops.A minimum permissible stroke of 40 mm must be allowed for
  
  

• High functional reliability  The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
  

• Home position The first time the supply voltage is switched on, i.e. during initial startup, the actuator carries out an adaptation. After pressing the «gear disengagement» pushbutton, the actuator moves to the home position at the end stop
  
  

• Adaption and synchronisation  During adaptation, the upper and lower spindle end stop is recorded and deposited in the actuator. Detection of the mechanical end stops enables a gentle approach to the end positions and thus protects the actuator mechanism.During synchronisation, the actuator moves to the home position for angle referencing. This ensures correct position regulation.
  
  

•     Electrical data 
•     Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
•     Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•     Power consumption In operation 13 W @ nominal torque At rest 2 W For wire sizing 23 VA (I max. 20 A @ 5 ms)
•     Connection Cable 1 m, 4 x 0.75 mm2
•     Functional data Factory settings
•     Actuating force Min. 200 N @ nominal voltage
•     Control Control signal Y DC 0 ... 10 V, input impedance 100 k�Operating range DC 2 ... 10 V
•     Position feedback (Measuring voltage) DC 2 ... 10 V, max. 0.5 mA
•     Position accuracy ±5%
•     Direction of stroke Reversible with switch 0 / 1
•     Direction of stroke at Y = 0 V At switch position 1 resp. 0
•     Manual override Gearing latch disengaged with pushbutton, can be locked
•     Stroke adjustment 20 ... 100 mm, adjustable in 20 mm-steps, can be limited at both ends with mechanical  end stops
•     Stroke limiting Min. 40 mm
•     Running time 7 s / 100 mm
•     Automatic adjustment of operating range Manual triggering of the adaption by pressing and measuring signal U to match the the «Adaption» button or with the PC-Tool mechanical stroke adjustment
•     Override control MAX (maximum position) = 100% n) = 0% ZS (intermediate position, only AC) = 50% 
•     Sound power level 52 dB (A)
•     Negative torque ≤50% from nominal torque (Caution: can only be used with restrictions. Please contact your Belimo representative.)
•     Safety III Safety extra-low voltage Protection class UL Class 2 Supply
•     Degree of protection IP54 in any mounting position NEMA 2, UL Enclosure Type 2
•     Certification Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14  cULus according to UL 60730-1A and UL 60730-2-14and CAN/CSA E60730-1:02
•     Mode of operation Type 1
•     Rated impulse voltage 0.8 kV
•     Control pollution degree 3
•     Ambient temperature –30 ... +40°C (no restrictions) +40 ... +50°C (Caution: can only be used with restrictions. Please contact your Belimo  representative.)
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity 95% r.H., non-condensating
•     Maintenance Maintenance-free
•     Dimensions / Weight
•     Dimensions See «Dimensions» on page 7
•     Weight Approx. 1.25 kg