TMC230ASR - Belimo Damper actuator 2 Nm, 35 s, constant, 95°

Find all the components for your ventilation system at IACS. All Belimo Actuators on hand are eligible for Free Delivery and 1-2 Delivery.

The Belimo TMC230ASR is a kind of Actuator used to manage dampers in HVAC applications and systems.

To control the damper, this kind of Actuator turns it by Rotary motion.

The Torque used by the TMC230ASR is 2 Nm.

This Belimo Actuator requests a power supply of 230Vac.

Find at IACS the ideal Belimo Actuator compatible with your system at the best price.

If you are unsure about size or installation, refer to the Belimo custom datasheet above or message iacs to receive special instructions and a custom quote.

TMC230ASR - Damper actuator 2 Nm, 35 s, constant, 95°

•    AC 230 V, modulating
•    IP 54, Disengagement pushbutton can be locked
•    Control DC 0...10 V
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V
•    Direction of rotation reversible (right/left)
•   Spindle driver Spindle clamp
•    Sound power level 35 dB (A)

Features
 

• Mode of operation The actuator is controlled by means of a standard control signal DC 0 ... 10 V. It opens to the position dictated by this signal. The measuring voltage U allows the damper position (0 ... 100%) to be electrically indicated and serves as a follow-up control signal for other actuators.


• Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.


• Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).


• Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.


• High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

•    Electrical Nominal voltage AC 100 ... 240 V, 50/60 Hz
•    Nominal voltage range AC 85 ... 265 V
•    Power consumption In operation 2 W @ nominal torque At rest 1 W For wire sizing 3.5VA
•    Connection Power supply Cable 1 m, 2 x 0.75 mm2 Signals Cable 1 m, 4 x 0.75 mm2
•    Functional data Torque (nominal torque) ≥2 Nm @ nominal voltage
•    Control Control signal Y DC 0 ... 10 V, typical input impedance 100 k Operating range DC 2 ... 10 V
•    Position feedback (Measuring voltage U) DC 2 ... 10 V, ≤1 mA
•    Auxiliary supply DC 24 V ±30%, ≤10 mA
•    Position accuracy ±5%
•    Direction of rotation Reversible with switch 0 or 1 , respectively
•    Direction of rotation at Y = 0 V At switch position  or  , respectively
•    Manual override Gearing latch disengaged with pushbutton, can be locked
•    Angle of rotation Max. 95°<) limited on both sides by means of adjustable, mechanical end stops
•    Running time 35 s / 90°
•    Sound power level Moto Max. 35 dB (A)
•    Position indication Mechanical, , pluggable
•    Safety Protection class II Totally insulated
•    Degree of protection IP54 NEMA 2, UL Enclosure Type 2
•    EMC CE according to 2004/108/EC Low voltage directive CE according to 2006/95/EC  
•    Certification Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14 cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02
•    Mode of operation Type 1.AA 
•    Rated impulse voltage 4 kV 
•    Control pollution degree 3
•    Ambient temperature range –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 2
•    MWeight Approx. 700 g